Sharp 3150 FO-3150 Operation Manual - Page 81
Requesting transmission, Being polled Memory polling
![]() |
UPC - 074000033832
View all Sharp 3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Polling (Requesting a Fax Transmission) Requesting transmission 1 Dial the fax machine you want to poll using one of the following methods: SPEAKER • Pick up the handset (or press ) and dial the full number. Wait for the fax answerback tone. SPEAKER • Pick up the handset (or press ) and press a Rapid Key. Wait for the fax answerback tone. SPEED DIAL • Press and enter a 2-digit Speed Dial number. • Enter the full number using the numeric keys. 2 Press 08/POLL . • If you used the handset, replace it when POLLING appears in the display. Reception will begin. Being polled (Memory polling) To let another fax machine poll your fax machine, you must first store the document(s) in memory using the following procedure. Transmission will take place when the other fax machine calls your fax machine and activates polling. You can choose whether to allow polling only once, or an unlimited number of times. In the latter case, your fax machine can be used as an electronic "bulletin board". ♦ If you allow polling only once, the document(s) will be automatically cleared from memory after polling. If you allow polling an unlimited number of times, the document will remain in memory until you clear it as explained in the following section, Clearing a memory polling document. 6. Special Functions 79
![](/manual_guide/products/sharp-fo3150-fo3150-operation-manual-f996799/81.png)