Sharp AL-1200 AL1200 Operation Manual - Page 30
User Maintenance
View all Sharp AL-1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
DRUM CARTRIDGE REPLACEMENT 4 Remove the new drum cartridge from the protective bag and remove the protective cover from the cartridge. Then gently install the new drum cartridge. Do not touch the surface of the drum (green portion) of the cartridge. Doing so may cause smudges on the copies. 5 Gently install the TD cartridge. To install the TD cartridge, see page 11, INSTALLING THE TD CARTRIDGE. 6 Close the front cover and then the side cover by pressing the round projections near the side cover open button. The drum replacement required ( ) indicator will go out and the ready ( ) indicator will light up. When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged. 5 Supplies and user maintenance USER MAINTENANCE Proper care is essential in order to get clean, sharp copies. Be sure to take a few minutes to regularly clean the copier. q Do not use thinner, benzene or other volatile cleaning agents. Doing so may cause deformation, discoloration, deterioration or malfunction. q Before cleaning, be sure to turn the power switch off and remove the power cord from the outlet. Cabinet Wipe the cabinet with a soft, clean cloth. Original table and original cover Stains on the glass or cover will also be copied. Wipe the glass and the cover with a soft, clean cloth. If necessary, dampen the cloth with water or a glass cleaner. Original table Original cover 29