Sharp AL-1200 AL1200 Operation Manual - Page 31
Transfer charger, When copier is not in use
View all Sharp AL-1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
USER MAINTENANCE Transfer charger If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger using the following procedure. 1 Turn the power switch off. 2 Ensure that the bypass tray is open and then open the side cover while pressing the side cover open button. 3 Take the charger cleaner out by holding the tab. Set the charger cleaner onto the transfer charger and gently slide the cleaner back and forth two or three times. Slide the charger cleaner from one end to the other end along the groove of the transfer charger. If the cleaner is stopped on the way, smudges on copies may occur. 5 4 Return the charger cleaner to its original position. Close the side cover by pressing the round projections near the side cover open button. Supplies and user maintenance 5 Turn the power switch on. When copier is not in use To prevent entry of dust and foreign matter, store the copier as follows. 1 Remove the power cord and secure the copier using tape (two locations). 30