Sharp AL1215 AL1215|AL1530|AL1540|AL1551 Operation Manual - Page 15
Power off methods
UPC - 074000074477
View all Sharp AL1215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Initial settings of operation panel When the unit power is on, the operation panel will revert to the initial settings when the time set with the "Auto clear time" setting (p.55) elapses after a copy or scanner job is finished, or when the clear ( ) key is pressed twice. The initial settings of the operation panel are shown below. 2 "0" is displayed in the display. When copying is begun in this state, the settings in the following table are used. Copy quantity Exposure adjustment Zoom AL-1551CS only Original to copy Tray 1 copy AUTO 100% The "Original to copy" indicator does not illuminate. (One-sided copying only) Paper tray 1 Power off methods If not used for a certain period of time, the unit will automatically enter auto power shut-off mode (p.54) in order to minimize power consumption. In cases where the machine will not be used for a long time, turn off the power switch and remove the power cord from the outlet. 13