Sharp AL1215 AL1215|AL1530|AL1540|AL1551 Operation Manual - Page 55
Selecting the tray
![]() |
UPC - 074000074477
View all Sharp AL1215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
A: When copying in a one-sided to two-sided mode: Use the original to copy key to select the desired one-sided to two-sided copying mode (Turn on Long Edge or Turn on Short Edge). See the illustrations on page 52. B: When copying in the two-sided to two-sided mode: Use the original to copy key to select the two-sided to two-sided copying mode. The originals must be set in the RSPF before this mode can be set in step 3 on page 48. C: When copying in the two-sided to one-sided mode: Use the original to copy key to select the two-sided to one-sided copying mode. The originals must have been set in the RSPF in step 3 on page 48. A B C 3 Select the copy settings. See "SET THE COPY QUANTITY" (p.49), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.49), and "REDUCTION/ENLARGEMENT/ZOOM" (p.51). Using the original table If you are using the original table, copying is only possible in one sided to two-sided mode ("A" above). 1 Press the start ( ) key. The original is scanned into the unit's memory and the number of the copy quantity blinks in the display. 2 Place the original that you wish to copy onto the rear side of the paper, and press the start ( ) key again. 6 Copying begins. Using the RSPF Press the start ( ) key. Copying begins in the selected two-sided copy mode. Selecting the tray Press the tray select ( ) key. Each time you press the tray select ( ) key, the location indicated by the paper feed location indicator changes in the following order: paper tray 1, paper tray 2, multibypass tray. 53
![](/manual_guide/products/sharp-al1215-al1215al1530al1540al1551-operation-manual-abf31e5/55.png)