Sharp AL1215 AL1215|AL1530|AL1540|AL1551 Operation Manual - Page 65

Misfeed Removal

Get Sharp AL1215 - B/W Laser - Copier PDF manuals and user guides
UPC - 074000074477
View all Sharp AL1215 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

MISFEED REMOVAL When the misfeed ( ) indicator blinks or blinks in the display, the unit will stop because of a misfeed. If a misfeed occurs when using the SPF/RSPF, a number may appear in the display after a minus sign. This indicates the number of the originals that must be returned to the original feeder tray after a misfeed. Return the required number of originals. Then this number will disappear when copying is resumed or the clear ( ) key is pressed. When the SPF/RSPF misfeeds an original sheet, the unit will stop and the SPF/RSPF misfeed ( ) indicator will blink, while the misfeed ( ) indicator will remain off. For a misfeed of originals in the SPF/ RSPF, see "E: Misfeed in the SPF/RSPF" (p.66). If the unit is turned on with the lower side cover open, the misfeed ( ) indicator will blink. In this case, close the lower side cover. The misfeed ( ) indicator will go out. 1 Open the multi-bypass tray (AL-1551CS), and side cover, in that order. To open the multi-bypass tray, see "The multi-bypass tray (AL-1551CS)" (p.17). To open the side cover, see "INSTALLING THE TD CARTRIDGE" (p.10). 2 Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfeed ( ) indicator blinks, proceed to "A: Misfeed in the paper feed area" (p.64). If the misfed paper is seen from this side, proceed to "C: Misfeed in the transport area". (p.65) If paper is misfed here, proceed to "B: Misfeed in the fusing area". (p.64) 8 If paper is misfed here, proceed to "D: Misfeed in the lower paper feed area". (p.66) If paper is misfed here, proceed to "A: Misfeed in the paper feed area". (p.64) 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
63
8
MISFEED REMOVAL
When the misfeed (
) indicator blinks or
blinks in the display, the unit will
stop because of a misfeed. If a misfeed occurs when using the SPF/RSPF, a number
may appear in the display after a minus sign. This indicates the number of the
originals that must be returned to the original feeder tray after a misfeed. Return the
required number of originals. Then this number will disappear when copying is
resumed or the clear (
) key is pressed. When the SPF/RSPF misfeeds an
original sheet, the unit will stop and the SPF/RSPF misfeed (
) indicator will blink,
while the misfeed (
) indicator will remain off. For a misfeed of originals in the SPF/
RSPF, see "E: Misfeed in the SPF/RSPF" (p.66).
1
Open the multi-bypass tray (AL-1551CS), and side cover, in that
order.
To open the multi-bypass tray, see "The multi-bypass tray (AL-1551CS)"
(p.17). To open the side cover, see "INSTALLING THE TD CARTRIDGE"
(p.10).
2
Check the misfeed location. Remove the misfed paper
following the instructions for each location in the illustration
below. If the misfeed (
) indicator blinks, proceed to "A:
Misfeed in the paper feed area" (p.64).
If the unit is turned on with the lower side cover open, the misfeed (
)
indicator will blink. In this case, close the lower side cover. The misfeed
(
) indicator will go out.
If paper is misfed here, proceed to "
A:
Misfeed in the paper feed area
". (p.64)
If paper is misfed here, proceed
to "
D: Misfeed in the lower
paper feed area
". (p.66)
If paper is misfed here, proceed to "
B:
Misfeed in the fusing area
". (p.64)
If the misfed paper is seen from
this side, proceed to "
C: Misfeed
in the transport area
". (p.65)