Sharp AR-157E AR-153E AR-157E Operation Manual Suite - Page 14
Making Copies, Copy Flow - copier
View all Sharp AR-157E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3 MAKING COPIES This chapter explains basic and other copying functions. The unit is equipped with a one-page memory buffer. This memory allows the unit to scan an original once only and make up to 99 copies. This feature improves workflow, reduces operation noise from the copier, and provides higher reliability by reducing wear and tear on the scanning mechanism. If the unit does not function properly during use, or if a function cannot be used, see "TROUBLESHOOTING THE UNIT" (p.30). COPY FLOW 1 Make sure that paper has been loaded in the paper tray (p.8) or multi-bypass tray (p.10), and check the paper size (p.7). If paper is not loaded, see page 8. 2 Turn on the unit (p.13). 3 Place the original. If you are using the original table, see "Using the original table" (p.14). If you are using the RSPF/SPF, see "Using the RSPF/SPF" (p.15). When copying onto paper larger than 8-1/2" x 11" size, pull out the paper output tray extension. 4 Select the copy settings. If you wish to copy using the initial settings (p.13), proceed to the next step. To set the number of copies, see page 16. To adjust the resolution and contrast settings, see page 16. To enlarge or reduce the copy, see page 18. To change the tray, see page 19. To print on both sides of paper, see page 20. (AR-157E) 5 Start copying. Press the start ( ) key. 12