Sharp AR-157E AR-153E AR-157E Operation Manual Suite - Page 15
POWER ON, About the scan head, Initial settings of operation panel
![]() |
View all Sharp AR-157E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
POWER ON Turn the power switch on the left side of the unit to the "ON" position. The start ( ) indicator will light up. • The unit will enter a power save mode once the set time has elapsed without any unit operation. The settings of the power save modes can be modified. See "USER PROGRAMS" (p.23). • The unit will return to the initial settings a preset amount of time after 3 the end of copy or scanner job. The preset amount of time (auto clear time) can be changed. See "USER PROGRAMS" (p.23). About the scan head The scan head lamp remains on constantly when the unit is in the ready condition (when the start ( ) indicator is illuminated). The unit adjusts the scan head lamp periodically to maintain copying quality. At this time, the scan head moves automatically. This is normal and does not indicate unit trouble. Initial settings of operation panel When the unit power is on, the operation panel will revert to the initial settings when the time set with the "Auto clear time" setting (p.22) elapses after a copy or scanner job is finished, or when the clear ( ) key is pressed twice. The initial settings of the operation panel are shown below. "0" is displayed in the display. When copying is begun in this state, the settings in the following table are used. Copy quantity Exposure adjustment Zoom Tray Original to copy (AR-157E) 1 copy AUTO 100% Paper tray 1 The "Original to copy" indicator does not illuminate. (One-sided copying only) 13
![](/manual_guide/products/sharp-ar153e-ar153e-ar157e-operation-manual-suite-68b92a0/15.png)