Sharp AR-157E AR-153E AR-157E Operation Manual Suite - Page 23
Select the copy settings. See SET THE COPY QUANTITY, p.16, EXPOSURE ADJUSTMENT/PHOTO COPYING p.16
View all Sharp AR-157E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Making two-sided copies 1 Place the original(s) on the original table or in the RSPF. (see "ORIGINAL PLACEMENT" (p.14). 2 Select two-sided copy mode. A: When copying in a one-sided to two-sided mode: Use the original to copy key to select the desired one-sided to two-sided copying mode (Turn on Long Edge or Turn on Short Edge). See the illustrations on page 20. B: When copying in the two-sided to two-sided mode: Use the original to copy key to select the two-sided to two-sided copying mode. The originals must be set in the RSPF before this mode can be set in step 3 on page 15. C: When copying in the two-sided to one-sided mode: Use the original to copy key to select the two-sided to one-sided copying mode. The originals must have been set in the RSPF in step 3 on page 15. 4 A B C 3 Select the copy settings. See "SET THE COPY QUANTITY" (p.16), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.16), and "REDUCTION/ENLARGEMENT/ZOOM" (p.18). Using the original table If you are using the original table, copying is only possible in one sided to two-sided mode ("A" above). 1 Press the start ( ) key. The original is scanned into the unit's memory and the number of the copy quantity blinks in the display. 2 Place the original that you wish to copy onto the rear side of the paper, and press the start ( ) key again. Copying begins. Using the RSPF Press the start ( ) key. Copying begins in the selected two-sided copy mode. 21