Sharp AR-157E AR-153E AR-157E Operation Manual Suite - Page 3
CAUTIONS, Caution label on the unit, Cautions on using
![]() |
View all Sharp AR-157E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
CAUTIONS Caution label on the unit The label ( ) in the fusing area of the unit indicates the following: : Caution, risk of danger : Caution, hot surface Cautions on using Follow the cautions below when using this unit. Warning: • The fusing area is hot. Exercise care in this area when removing misfed paper. • Do not look directly at the light source. Doing so may damage your eyes. • Do not switch the unit rapidly on and off. After turning the unit off, wait 10 to 15 seconds before turning it back on. • Unit power must be turned off before installing any supplies. Caution: • Place the unit on a firm, level surface. • Do not install the unit in a humid or dusty location. • When the unit is not used for a long time, for example for consecutive holidays, turn the power switch off and remove the power cord from the outlet. • When moving the unit, be sure to turn the power switch off and remove the power cord from the outlet. • Do not cover the unit with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat radiation, damaging the unit. • Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. • The socket-outlet shall be installed near the unit and shall be easily accessible. Important points when selecting an installation site Do not install your unit in areas that are: • damp, humid, or very dusty • exposed to direct sunlight • poorly ventilated • subject to extreme temperature or humidity changes, e.g., near an air conditioner or heater. Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements. Also make certain the outlet is properly grounded. Connect the unit to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the same outlet, the light may flicker. Be sure to allow the required space around the machine for servicing and proper ventilation. 8" 4" 4" 1
![](/manual_guide/products/sharp-ar153e-ar153e-ar157e-operation-manual-suite-68b92a0/3.png)