Sharp AR-201 AR-201 Operation Manual - Page 45
Power Save Modes - fuser
View all Sharp AR-201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
POWER SAVE MODES The copier has two power save modes to reduce overall power consumption thereby reducing the cost of operation. In addition, these modes conserve natural resources and help reduce environmental pollution. The two power save modes are preheat mode and auto power shut-off mode. q User programs The preheat activation time and the auto power shut-off time have been preset at the factory to 90 sec.* for preheat mode and 30 min. for auto power shut-off mode. These times can be changed using user programs. It is suggested that you set appropriate times according to the actual usage of the copier. See page 36. * In European countries, the factory default setting is 30 sec. Preheat mode When the copier enters the preheat mode, the POWER SAVE ( ) indicator will light up and other indicators will remain on or off as before. In this condition, the fuser in the copier is maintained at a lower heat level, thereby saving power. The preheat level is, however, high enough to allow the copier to come to a ready condition or begin copying within 10 seconds after any key input or copier operation such as paper tray operation is performed. Auto power shut-off mode When the copier enters the auto power shut-off mode, the POWER SAVE ( ) indicator will light up and all other indicators will go out. The auto power shut-off mode saves more power but requires a longer time to warm up before copying can begin. As an ENERGY STAR® Partner, SHARP has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. 43 GENERAL INFORMATION Power save modes