Sharp AR-201 AR-201 Operation Manual - Page 49
Copier Trouble?
View all Sharp AR-201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
COPIER TROUBLE? GENERAL INFORMATION Copier trouble? Problem q Copier plugged in? Copier does not operate. q Power switch ON? Solution Plug the copier into a grounded outlet. See page 8. Turn the power switch ON. See page 14. Copies are too dark or too light. Blank copies q Copy density properly adjusted? See pages 14 and 26. q Is the original placed face down? Place the original face down on the original table. Copies smear if rubbed. q Paper too heavy? q Paper damp? Use copy paper within the specified range. See page 50. Replace with dry copy paper. Be sure to store copy paper in a dry location. See page 51. Striped copies q Is transfer charger clean? Clean the transfer charger. See page 46. q Non-standard paper used? Use standard paper. If using special paper, feed the paper through the bypass tray. See pages 18 and 50. q Paper properly installed? Paper misfeeds frequently. q Pieces of paper inside copier? Make sure the paper is properly installed. See pages 10 and 18. Remove all pieces of misfed paper. See page 30. q Paper curled or damp? Store copy paper flat in the wrapper in a dry location. See page 51. Paper misfeeds frequently q First copy curled? in two-sided copying. If the first copy has curled up, flatten it and change the orientation of the original and copy paper. Original size not selected automatically. q Has the platen cover been completely Open the platen cover completely and then place opened when the original is placed on the original on the original table. the original table? Close the platen cover. q Does the original include large black If the original includes large black solid area, the solid area? original size may not be detected. Use the TRAY SELECT ( ) key to select the desired size. 47