Sharp AR-F152 AR-F152 Operation Manual - Page 25
Supplies And User Maintenance - copier toner
View all Sharp AR-F152 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
SUPPLIES AND USER MAINTENANCE This chapter describes how to replace the toner cartridge. Be sure to use only genuine SHARP parts and supplies. TONER CARTRIDGE REPLACEMENT When the toner cartridge replacement required ( ) indicator lights up, replacement of the toner cartridge will be needed soon. Obtain a new cartridge.When the toner cartridge replacement required ( ) indicator blinks, the toner cartridge must be replaced before copying can be resumed. Replace the toner cartridge by following the procedure below. During long copy run of a dark original, the ready ( ) indicator may blink, the indicator light up, and the copier stop, even though toner is left. The 4 copier will feed toner up to 2 minutes and then the ready ( ) indicator will light up. Press the print ( ) key to restart copying. Ensure that the bypass tray is open and then open the side cover while pressing the side cover open button. Then, push gently on both sides of the front cover to open the cover. Supplies and user maintenance Push the toner cartridge lock release lever and pull the toner cartridge out. Dispose of the old toner cartridge in accordance with local regulations. Toner cartridge lock release lever 11chap-4.p65 After removing the toner cartridge, do not shake it or tap on it. Doing so may cause a spill of toner. 23 23 18/10/00, 19:41