Sharp AR-F152 AR-F152 Operation Manual - Page 31
Lower the fusing unit release lever by rotating it all the way as shown in the illustration.
View all Sharp AR-F152 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
MISFEED REMOVAL G Do not touch the photoconductive drum (green portion) when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. G Do not remove the misfed paper from above the fusing unit. Unfixed toner on the paper may stain the paper transport area, resulting in smudges on copies. Raise the fusing unit release lever and then close the side cover by pressing the round projections near the side cover open button.The misfeed ( ) indicator will go out and the ready ( ) indicator will light up. C Misfeed in the transport area Lower the fusing unit release lever by rotating it all the way as shown in the illustration. 5 While you are lowering the fusing unit release lever, it will not move smoothly at a location on the way. However, be sure to lower the lever by rotating it all the way to the location where it will not rotate as shown in the right illustration. Fusing unit release lever Copier trouble? Push gently on both sides of the front cover to open the cover. 29