Sharp AR-M208 AR-M208 Key Operator's Guide - Page 13

KEY OPERATOR PROGRAMS Output Trays If a job separator tray kit or a finisher is installed along with a facsimile expansion kit, this program can be used to specify which output tray will be used to receive copies and which will be used to receive prints. When "OUTPUT TRAYS" is selected and the OK key is pressed, the following display will appear. (Example: The following display is shown for a copier equipped with a facsimile expansion kit, and a job separator tray kit.) OUTPUT TRAYS FAX COPY PRINT PATTERN 1 1. Use the and keys to select the desired pattern of output trays. 2. Press the OK key. Offset Function If the offset function is enabled, each set of copies will be stacked offset from the previous set in the sort and group modes in the center tray of the copier or in the offset tray of a finisher. This program is used to enable or disable the offset function for these trays respectively. When "OFFSET FUNCTION" is selected and the OK key is pressed, the following display will appear. OFFSET FUNCTION CENTER TRAY OFFSET TRAY OFFSET ON 1. Use the or key to enable or disable the offset function for the center tray of the copier. 2. If a finisher is installed, use the key to select "OFFSET TRAY" and use the or key to enable or disable the offset function for the offset tray of the finisher. 3. Press the OK key. 11