Sharp AR-M208 AR-M208 Operation Manual - Page 43
BYPASS FEED special, paper
View all Sharp AR-M208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
BYPASS FEED (special paper) The bypass tray must be used to feed special papers such as transparency film and labels but can also be used to feed standard copy paper. Acceptable paper for copying from the bypass tray Size Weight Ordinary paper: 5-1/2" x 8-1/2" 14 lbs. to 34 lbs.* to 11" x 17" (Ordinary paper) Envelopes: Commercial 10 (4-1/8" x 9-1/2"), International DL (110 x 220 mm), International C5 (162 x 229 mm) Capacity (21 lb. bond paper) 100 sheets Special paper Transparency film, labels, envelopes** * For paper weighing from 28 to 34 lbs., 8-1/2" x 11" is the maximum size that can be fed through the bypass tray. **Do not use envelopes that have metal clasps, plastic snappers, string closures, windows, linings, selfadhesive patches or synthetic materials. These will cause physical damage to the copier. G For best results, use only paper recommended by SHARP. G Special papers except SHARP recommended transparency film, labels, and envelopes must be fed one sheet at a time through the bypass tray. Up to 40 sheets of SHARP recommended transparency film and labels can be set at one time. Up to 5 envelopes can be set at one time. G When feeding two or three hole prepunched paper, load the paper so that the punched edge is not positioned in the feed slot. MAKING COPIES 2 Copying from the bypass tray 1 Unfold the bypass tray. G When feeding 8-1/2" x 11"R, 8-1/2" x 14" or 11" x 17" sized paper, extend the bypass tray to support the paper. 41