Sharp AR-M208 AR-M208 Operation Manual - Page 83
Misfeed in the upper exit area
![]() |
View all Sharp AR-M208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
2 Remove the misfed paper. MISFEED REMOVAL G Be careful not to tear the misfed paper during removal. 3 If the misfed paper is not seen in step 2, pull out the lower paper tray and remove the misfed paper. G Be careful not to tear the misfed paper during removal. 4 Close the paper tray. 5 Close the lower side cover. 4 COPIER TROUBLE? G Confirm that the misfeed display has been cleared. Misfeed in the upper exit area If an optional job separator tray kit or an optional finisher is installed, a misfeed may occur in the upper exit area. 1 Open the upper exit area cover. 81
![](/manual_guide/products/sharp-arm208-arm208-operation-manual-7ccb0ea/83.png)
MISFEED REMOVAL
81
4
COPIER TROUBLE?
2
Remove the misfed paper.
●
Be careful not to tear the misfed paper during removal.
3
If the misfed paper is not seen in step 2, pull out the lower paper tray
and remove the misfed paper.
●
Be careful not to tear the misfed paper during removal.
4
Close the paper tray.
5
Close the lower side cover.
●
Confirm that the misfeed display has been cleared.
Misfeed in the upper exit area
If an optional job separator tray kit or an optional finisher is installed, a misfeed may occur in the upper
exit area.
1
Open the upper exit area cover.