Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for copier) - Page 13

NORMAL COPYING Automatic two-sided copying from the automatic document feeder A duplex module must be installed for automatic 1-sided to 2-sided or 2-sided to 2-sided copying. A duplex module is not needed for 2-sided to 1-sided copying. Original Copy 1. Automatic two-sided copying from one-sided originals 2. Automatic two-sided copying from two-sided originals 3. Automatic one-sided copying from two-sided originals 1 Place the originals in the document feeder tray. (page 7) 2 Touch the [2-SIDED COPY] key. 2-SIDED COPY 4 Touch the [OK] key. OK BINDING CHANGE OUTPUT Follow step 6 on page 9 to step 9 on page 10. 3 Select the desired duplex copy mode. The illustration to the left BIN shows the screen CHA displayed when a duplex module is installed. The image to be copied onto the second side of 2-sided copies can be inverted so that the resultant 2-sided copies are in the correct orientation for binding at the top. For top binding, touch the [BINDING CHANGE] key on the 2-sided copy selection screen. 11