Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for copier) - Page 7

PART NAMES AND FUNCTIONS Touch Panel (basic screen of copy mode) When the copy mode key is pressed, this display screen will appear showing the basic copy mode selections. (For the display screens for other modes, see the respective operation manuals for those modes.) READY TO SCAN FOR COPY. SPECIAL MODES ORIGINAL 8 11 1/2x 2-SIDED COPY OUTPUT 8 11 1/2x 1. 8 11 1/2x 2. 8 11 1/2x 3. 11x17 4.81/2x11R AUTO EXPOSURE AUTO 8 11 1/2X PAPER SELECT 100% COPY RATIO Message display Basic status messages are displayed here. [INTERRUPT] key display area When interrupt copy is available, the [INTERRUPT] key will be displayed here. When an interrupt copy job is being run, a [CANCEL] key will be displayed here to be used for canceling the interrupt copy job. Copy quantity display Displays the selected number of copies before the [START] key is pressed or the number of completed copies after the [START] key is pressed. A single copy can be made when "0" displayed. [2-SIDED COPY] key (page 9) Touch to display the duplex copy mode setting screen. A highlighted selection on the screen will indicate the currently selected mode. The setting screen can be closed by touching the [OK] key on the setting screen whether or not a selection change was made. [OUTPUT] key (page 10) Touch to display the output mode setting screen. A highlighted selection on the screen will indicate the currently selected mode. The setting screen can be closed by touching the [OK] key on the setting screen whether or not a selection change was made. [SPECIAL MODES] key Touch to display the special modes selection screen. The functions that can be selected by touching this key are described on page 19. Paper size display The display shows the location of the paper trays, the size of the paper in the trays and the approximate amount of paper loaded in each tray.The approximate amount of paper in a tray is indicated by . For changing the paper size in a tray refer to page 116 of the "Operation manual (for printer operation and general information)". Original size display The original paper size will be displayed when originals are placed on the document glass or in the document feeder. Exposure display and [EXPOSURE] key (page 15) A touch of the [EXPOSURE] key will open the exposure selection window. A highlighted key on the exposure window indicates which exposure mode (AUTO, TEXT, TEXT/PHOTO or PHOTO) is currently selected. When an exposure mode other than AUTO is selected, an exposure level scale will also appear in the window. Paper select display and [PAPER SELECT] key (page 9) Displays the selected paper size. When the auto paper select mode has been selected, "AUTO" will be displayed. A touch of the [PAPER SELECT] key will open the paper selection window. When a selection is made, the selection window will close. To close the window without making a selection touch the key again Copy ratio display and [COPY RATIO] key (page 17) Displays the selected copy ratio. Touch to display the reduction and enlargement copy ratio selection screen. 5