Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for copier) - Page 33
Specifications
![]() |
View all Sharp AR-M280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
SPECIFICATIONS Copier Resolution Gradation Originals Copy sizes Warm-up time First-copy time* Copy ratio Continuous copy Scan: 600 dpi or 300 dpi, output: 600 dpi Scan: 256 levels, output: 2 levels Sheets, bound documents Maximum size: 11" x 17" or A3 Max. 11" x 17" or A3, min. 5-1/2" x 8-1/2" or A5 Image loss: Max 21/64" or 8 mm (leading edge), max. 21/64" or 8 mm (side edges) Approx. 80 seconds 35 copy/min. type: 5.3 seconds 45 copy/min. type: 4.6 seconds * Paper is fed from paper tray 1, quick scan from document glass (page 33) is set, the original scanning resolution on the document glass is set to 600 x 300 dpi and no optional hard disk drive is installed. Variable: 25 to 400% in 1% increments, total 376 steps Fixed presets: 25%, 64%, 77%, 100%, 121%, 129%, and 400% for inch system, 25%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, and 400% for AB system 999 copies; subtractive counter Copying speed 11" x 17" or A3 8-1/2" x 14" or B4 8-1/2" x 11" or A4 8-1/2" x 11"R or A4R 35 copy/min. type 17 copies/min. 20 copies/min. 35 copies/min. 25 copies/min. Copying speed 11" x 17" or A3 8-1/2" x 14" or B4 8-1/2" x 11" or A4 8-1/2" x 11"R or A4R 45 copy/min. type 20 copies/min. 22 copies/min. 45 copies/min. 30 copies/min Scanner module Name Type Original feed system Original exit system Original transport system Original setting direction Original sizes Original weight Capacity Power supply Dimensions Weight B/W scanner module/DSPF Two-side simultaneous scanning system from the document feeder. One-sided scanning from the document glass Automatic continuous feeding Face down output DSPF: sheet through type (reference position: center), document glass: reference position is left rear Face down 5-1/2" x 8-1/2" to 11" x 17" or A5 to A3 14 to 34 lbs. or 50 to 128 g/m2 Up to 50 sheets (30 sheets for 8-1/2" x 14" or B4 or larger originals) provided the total aggregate thickness does not exceed 1/4" or 6.5 mm (14 to 20 lbs. or 50 to 80 g/m2) or 3/16" or 5 mm (21 to 34 lbs. or 80 to 128 g/m2) Drawn from the main unit 31-13/16" (W) x 24-3/8" (D) x 7-3/32" (H) or 808 mm (W) x 619 mm (D) x 180 mm (H) Approx. 43 lbs. or 19.5 kg 31
![](/manual_guide/products/sharp-arm280-arm280-arm350-arm450-operation-manual-copier-37b03ca/33.png)