Sharp CD-BA300 CDBA300 Operation Manual - Page 15
Setting the Clock
View all Sharp CD-BA300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setting the Clock 4 Press the TUNING/TIME (X or W) button to adjust the hour and then press the MEMORY/SET button. q Press the TUNING/TIME (X or W) button once to advance the time by 1 hour. Hold it down to advance continuously. q When the 12-hour display is selected, "AM" will change automatically to "PM". 5 Press the TUNING/TIME (X or W) button to adjust the minutes and then press the MEMORY/SET button. Basic Operation - Setting the Clock - In this example, the clock is set for the 12-hour (AM 12:00) display. 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CLOCK button and within 5 seconds, press the MEMORY/SET button. 3 Press the TUNING/TIME (X or W) button to select the 12-hour or 24-hour display and then press the MEMORY/SET button. "AM 12:00"→ The 12-hour display will appear. (AM 12:00 - PM 11:59) "AM 0:00" → The 12-hour display will appear. (AM 0:00 - PM 11:59) "0:00" → The 24-hour display will appear. (0:00 - 23:59) Note that this can only be set when the unit is first installed or it has been reset (see page 30). q Press the TUNING/TIME (X or W) button once to advance the time by 1 minute. Hold it down to change the time in 5-minute intervals. q The hour will not advance even if minutes advance from "59" to "00". q The clock begins counting from "0" seconds. (Seconds are not displayed.) The time display will disappear after a few seconds. To confirm the time display: Press the CLOCK button. The time display will appear for about 5 seconds. Note: The "CLOCK" or time will flash at the push of the CLOCK button when the AC power supply is restored after a power failure or after unplugging the unit. Readjust the clock as follows. To readjust the clock: Perform "Setting the Clock" from the beginning. If the time display is flashing, step 3 (for selecting the 12-hour or 24-hour display) will be skipped. To change the 12-hour or 24-hour display: 1. Clear all the programmed contents. [Refer to step 3 under "If trouble occurs" on page 30 for details.] 2. Perform "Setting the Clock" from the beginning. 15 *BA300_P13_15 15 00.11.16, 2:49 PM