Sharp CD-BA300 CDBA300 Operation Manual - Page 22
Tape Playback
![]() |
View all Sharp CD-BA300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Listening to a Cassette Tape (TAPE 1 or TAPE 2) Before playback: q For playback, use normal or low-noise tape for the best sound. (Metal or CrO2 tape is not recommended.) q Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. q Before loading a tape into the cassette compartment, tighten the slack with a pen or pencil. Playback is possible in TAPE 1 compartment as well as in TAPE 2. 1 Press the ON/STAND-BY button to turn the power on. 2 Open the cassette door by pushing the area marked "7 PUSH EJECT". Tape Playback - Listening to a Cassette Tape (TAPE 1 or TAPE 2) - 22 s Sound Control (See page 14) *BA300_P22 22 3 Load the cassette into the TAPE 1 or TAPE 2 cassette compartment with the side to be played facing toward you. TAPE 1 TAPE 2 4 Press the TAPE (1 V 2) button to select the cassette you want to listen to. 5 Press the 0/R button to start playback. When playback is performed using the remote control, press the TAPE 1 or TAPE 2 0 button. To stop playback: Press the s (TAPE s) button. Fast forward/rewind: (TAPE 2 only) 1. Press the s (TAPE s) button, then press the TAPE (1 V 2) button to select TAPE 2. 2. To advance the tape, press the W PRESET 2 4 (TAPE 2 2) button. To rewind it, press the 5 3 PRESET X (TAPE 2 3) button. Caution: q To remove the cassette, press the s (TAPE s) button, and then open the compart- ment. q Before changing from one tape operation to another, press the s (TAPE s) button. q If a power failure occurs during tape operation, the tape head will remain engaged with the tape and the cassette door will not open. Wait until the power is restored. 00.11.16, 2:52 PM
![](/manual_guide/products/sharp-cdba300-cdba300-operation-manual-be211e1/22.png)