Sharp CD-BA300 CDBA300 Operation Manual - Page 31

References - Specifications - Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. s General Power source Power consumption Dimensions Weight AC 120 V, 60 Hz 210 W Width: 10-11/16" (270 mm) Height: 13" (330 mm) Depth: 14-11/16" (372 mm) 19.2 lbs (8.7 kg) s Amplifier Output power Output terminals Input terminals 125 watts minimum RMS per channel into 6 ohms from 60 Hz to 20 kHz, 10 % total harmonic distortion Subwoofer : 75 W/ch (60 Hz - 200 Hz, 6 ohms, 10 % T.H.D.) Main : 50 W/ch (200 Hz - 20 kHz, 6 ohms, 10 % T.H.D.) Speakers: 6 ohms Headphones: 16-50 ohms (recommended; 32 ohms) Video/Auxiliary (audio signal): 500 mV/47 kohms s CD player Type Signal readout D/A converter Frequency response Dynamic range 3-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20,000 Hz 90 dB (1 kHz) s Tuner Frequency range FM: 87.5-108 MHz AM: 530-1,720 kHz s Cassette deck Frequency response Signal/noise ratio Wow and flutter 50-14,000 Hz (Normal tape) 55 dB (TAPE 1, playback) 50 dB (TAPE 2, recording/playback) 0.25 % (WRMS) s Speaker Type Maximum input power (Total) Rated input power (Total) Impedance Dimensions Weight 3-way type speaker system 2" (5 cm) Tweeter 5-1/4" (13 cm) Woofer 6-1/2" (16 cm) Subwoofer 250 W 125 W 6 ohms Width: 11-5/16" (287 mm) Height: 13" (330 mm) Depth: 11-1/16" (281 mm) 11.1 lbs. (5.0 kg)/each *BA300_P29_31 31 00.11.16, 2:55 PM 31