Sharp CD-MPX850 CD-MPX850 Operation Manual - Page 32

Recording on a cassette tape continued

Page 32 highlights

CD-MPX850 Recording on a cassette tape (continued) To perform programmed recording: 1 Program discs and tracks (see page 22). 2 Press the button. 3 Press the / (TAPE ) button to start recording. To stop recording: Press the (TAPE ) button. The disc and tape will stop. Recording from the radio 1 Tune in to the desired station (see page 27). 2 Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. 3 Press the button. Recording will be paused. Dubbing from tape to tape You can record from TAPE 1 to TAPE 2. 1 Press the ON/STAND-BY button to turn the power on. 2 Load a prerecorded cassette into the TAPE 1 cassette compartment. Insert a blank tape into the TAPE 2 cassette compartment. TAPE 1 TAPE 2 It is recommended that the recording tape is the same length as the master tape. 3 Press the TAPE (1 2) button until "TAPE 1" appears on the display. 4 Press the button. Recording will be paused. Tape Recording 4 Press the / (TAPE ) button to start recording. To interrupt recording: Press the button. To resume recording, press the / (TAPE ) button. 5 Press the / (TAPE ) button to start dubbing. To stop dubbing: Press the (TAPE ) button. TAPE 1 and TAPE 2 will stop simultaneously. To stop recording: Press the (TAPE ) button. Note: If you hear a whistling noise while recording an AM station, move the AM loop antenna. Erasing recorded tapes 1 Load the tape to be erased into the TAPE 2 cassette compartment with the side to be erased facing toward you. 2 Press the TAPE (1 2) button until "TAPE 2" appears on the display. 3 Press the button. 4 Press the / (TAPE ) button to start erasing. Note: Make sure that the TAPE 1 is not in use. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

32
CD-MPX850
Tape Recording
Recording on a cassette tape (continued)
To perform programmed recording:
To stop recording:
Press the
(TAPE ) button.
The disc and tape will stop.
±
Recording from the radio
To interrupt recording:
Press the
button.
To resume recording, press the
/
(TAPE
) button.
To stop recording:
Press the
(TAPE ) button.
Note:
If you hear a whistling noise while recording an AM station, move the
AM loop antenna.
±
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the
(TAPE ) button.
TAPE 1 and TAPE 2 will stop simultaneously.
±
Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
1
Program discs and tracks (see page 22).
2
Press the
button.
3
Press the
/
(TAPE
) button to start recording.
1
Tune in to the desired station (see page 27).
2
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the
button.
Recording will be paused.
4
Press the
/
(TAPE
) button to start recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
It is recommended that the recording tape is the same length as
the master tape.
3
Press the TAPE (1
2) button until “TAPE 1” appears on
the display.
4
Press the
button.
Recording will be paused.
5
Press the
/
(TAPE
) button to start dubbing.
1
Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
2
Press the TAPE (1
2) button until “TAPE 2” appears on the dis-
play.
3
Press the
button.
4
Press the
/
(TAPE
) button to start erasing.
TAPE 1
TAPE 2