Sharp CD-MPX850 CD-MPX850 Operation Manual - Page 36

Timer and sleep operation Remote control only continued

Page 36 highlights

CD-MPX850 Timer and sleep operation (Remote control only) (continued) Advanced Features Sleep operation The radio, CD, MP3/WMA disc and cassette tape can all be turned off automatically. 1 Play back the desired sound source. 2 Press the CLOCK/TIMER button. 3 Within 10 seconds, press the or button to select "SLEEP", and press the MEMORY button. 4 Press the or button to select the time. (Maximum: 3 hours - Minimum: 1 minute) 3 hours - 5 minutes 5-minute intervals 5 minutes - 1 minute 1-minute intervals 5 Press the MEMORY button. "SLEEP" will appear. 6 The unit will enter the power stand-by mode automatically after the preset time has elapsed. The volume will be turned down 1 minute before the sleep operation finishes. To confirm the remaining sleep time: 1 While "SLEEP" is indicated, press the CLOCK/TIMER button. 2 Within 10 seconds, press the or button to select "SLEEP X : XX". "X : XX" is remaining sleep time. The remaining sleep time is displayed for about 10 seconds. You can change the remaining sleep time while it is displayed by pressing the MEMORY button. To cancel the sleep operation: Press the ON/STAND-BY button while "SLEEP" is indicated. To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows. 1 While "SLEEP" is indicated, press the CLOCK/TIMER button. 2 Within 10 seconds, press the or button to select "SLEEP OFF", and press the MEMORY button. To use timer and sleep operation together Sleep and timer playback: For example, you can fall asleep listening to the radio and wake up to CD in the next morning. Sleep and timer recording: For example, you can fall asleep listening to the CD and record radio programs while sleeping. 1 Set the sleep time (see left, steps 1 - 5). 2 While the sleep timer is set, set the timer playback or recording (steps 2 - 10, pages 33 - 34). Timer playback or Sleep timer setting recording setting End time 1 minute - 3 hours Desired time Sleep operation will automatically stop. Timer playback or recording start time Caution: When using the cassette deck, be sure the tape length is long enough to perform both functions. If you want to sleep and wake up listening to a tape, and the length of the tape is shorter than the sleep timer setting, timer playback or recording will not be possible. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

36
CD-MPX850
Advanced Features
Timer and sleep operation (Remote control only) (continued)
±
Sleep operation
The radio, CD, MP3/WMA disc and cassette tape can all be turned
off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button while “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
±
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record radio
programs while sleeping.
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the sleep
timer setting, timer playback or recording will not be possible.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to select
“SLEEP”, and press the
MEMORY button.
4
Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
z
3 hours - 5 minutes
5-minute intervals
z
5 minutes - 1 minute
1-minute intervals
5
Press the MEMORY button.
“SLEEP” will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
1
While “SLEEP” is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select
“SLEEP X : XX”.
“X : XX” is remaining sleep time.
z
The remaining sleep time is displayed for about 10 seconds.
z
You can change the remaining sleep time while it is displayed by
pressing the MEMORY button.
1
While “SLEEP” is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select
“SLEEP OFF”, and press the MEMORY button.
1
Set the sleep time (see left, steps 1 - 5).
2
While the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 33 - 34).
Sleep timer setting
Timer playback or
recording setting
Sleep operation will
automatically stop.
Timer playback or recording
start time
End time
1 minute - 3 hours
Desired time