Sharp CD-SW440N CD-SW440N Operation Manual - Page 6

Listening to the iPod (continued) Listening to a CD or MP3/WMA disc Watching videos on a TV connected to iPod 1 Press the DISPLAY (TV OUT) button for more than 2 seconds. "TV DISP" will appear on display. 2 Press the ENTER button to start playback. Notes: ● If the TV Out setting is already turned on at video menu, the video is automatically displayed on the TV screen when ENTER key is pressed. ● To return to watching video on iPod screen, press the MENU button to enter video menu. Then press the DISPLAY (TV OUT) button for more than 2 seconds until "iPodDISP" appears. ● During iPod video playback, pressing the DISPLAY (TV OUT) button will not toggle video out display between iPod and TV. iPod playback detection function: Once the play button on the iPod unit is pressed, the main unit will automatically change to iPod function overriding the previous function selected. Caution: ● Unplug all accessories for the iPod before inserting it into the iPod dock. ● Stop button ( ) at main unit is invalid during iPod function. Various iPod functions POWER ON/STAND-BY MINI COMPONENT SYSTEM CD-SW440 POWER ON/STAND-BY FUNCTION VOL CD USB TAPE Function Main unit Play Remote Operation control Press in the pause mode. Pause Track up/ ____ down Fast forward/ reverse ____ Display ____ Repeat ____ Shuffle ____ iPod Menu iPod Enter ____ ____ iPod ____ Cursor Up/Down Press in the playback mode. Press in the playback or pause mode. If you press the button in the pause mode, press the / button to start the desired track. Press and hold down in the playback mode. Release the button to resume playback. iPod back light ON. Press for more than 2 seconds to toggle the video out display between iPod or TV. Press to toggle repeat mode. Press and hold down to toggle shuffle mode. Press to view the iPod menu during iPod function. Press to confirm the selection. Press to select the iPod menu. Disc playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button on the remote control or FUNCTION button repeatedly on the main unit to select CD function. 3 Press the OPEN/CLOSE button to open the disc tray. 4 Place the disc on the disc tray, label side up. 5 Press the OPEN/CLOSE button to close the disc tray. 6 Press the / (CD / ) button to start playback. After the last track is played, the unit will stop automatically. Notes for CD or MP3/WMA disc: ● When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode (only for CD). ● Rewritable multi-session discs with unfinished writing, can still be played. Various disc functions Function Pause Track up/ down Fast forward/ reverse Main unit ____ ____ Remote control Operation Press in the playback mode. Press the / button to resume playback from the paused point. Press in the playback or stop mode. If you press the button in the stop mode, press the / button to start the desired track. Press and hold down in the playback mode. Release the button to resume playback. E-5