Sharp DT300 DT300 Operation Manual - Page 23
Plug and Play, function
UPC - 074000364073
View all Sharp DT300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Connecting the Projector to Other Devices Connecting to a computer with DIGITAL RGB output Terminal (DIGITAL INPUT) 1 Slide the "DIGITAL INPUT TYPE" switch on the back terminal board to "PC". 2 Connect a DVI cable to the pro- jector. 3 Connect the above cable to the computer. • Secure the connectors by tightening the thumbscrews. Note • Select DIGITAL INPUT mode when connecting to digital output terminal of the computer. (See page 31.) • Before switching the "DIGITAL INPUT TYPE" switch and connecting, be sure to unplug the power cord of the projector from the AC outlet and turn off the computer to be connected. After making all connections, turn on the projector and then the computer. • Be sure that the computer is the last device to be turned on after all the connections are made. Optional accessory DVI cable Type: AN-C3DV (9'10'' (3.0 m)) To DIGITAL INPUT terminal DIGITAL INPUT TYPE switch DVI cable (sold separately) To DVI digital output terminal Desktop computer "Plug and Play" function I This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible computer will communicate their setting requirements, allowing for quick and easy setup. I Before using the "Plug and Play" function, be sure to turn on the projector first and the connected computer last. Note • The DDC "Plug and Play" function of this projector operates only when used in conjunction with a VESA DDC compatible computer. -22 %5@&@Q@Q Page 22 03.10.29, 2:40 PM "EPCF1BHF.BLFS+11$