Sharp DT300 DT300 Operation Manual - Page 55
Selecting the Menu, Screen Position, Automatic Power Shut, off Function
UPC - 074000364073
View all Sharp DT300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Using the "Options" Menu Automatic Power Shutoff Function When no input signal is detected for more than 15 minutes, the projector will automatically enter the standby mode if set to " " (ON). Select "Auto Power Off" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 38 to 41. Selected Item Description Projector automatically enters the standby mode after 15 minutes without an input signal. Automatic Power Shut-off disabled. Note • "Auto Power Off" is factory preset to " ". • When the Auto Power Off function is set to " (ON)", 5 minutes before the projector enters the standby mode, the message "Enter STANDBY mode in X min." will appear on the screen to indicate the remaining minutes. Selecting the Menu Screen Position This function allows you to select the desired position of the menu screen. Select "Menu Position" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 38 to 41. Selected Item Description Center Upper Right Lower Right Upper Left Lower Left The menu is displayed on the center of the image. The menu is displayed on the upper right of the image. The menu is displayed on the lower right of the image. The menu is displayed on the upper left of the image. The menu is displayed on the lower left of the image. -54 %5@&@Q@Q Page 54 On-screen Display On-screen Display 03.10.29, 2:46 PM "EPCF1BHF.BLFS+11$