Sharp DT300 DT300 Operation Manual - Page 51
Auto Sync Adjustment, Checking the Input Signal
UPC - 074000364073
View all Sharp DT300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Adjusting the Computer and DVD/DTV Images Auto Sync Adjustment Used to automatically adjust a computer image. Select whether the image is to be synchronized automatically when switching the signal with "ON" or "OFF". Select "Auto Sync" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 38 to 41. Selected Item Description (ON) Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer. Auto Sync adjustment is not (OFF) automatically performed. Note • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 48.) • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • "Auto Sync" cannot be used in the DIGITAL INPUT mode. • Auto Sync adjustment is also performed by pressing AUTO SYNC on the remote control. Checking the Input Signal This function allows you to check the current input signal information. Select "Signal Info" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 38 to 41. Note • 540P is displayed on the screen when signal 1080I is inputted during DVI connection. -50 %5@&@Q@Q Page 50 On-screen Display AUTO SYNC button On-screen Display 03.10.29, 2:44 PM "EPCF1BHF.BLFS+11$