Sharp DT300 DT300 Operation Manual - Page 8
Quick Guide - 31
UPC - 074000364073
View all Sharp DT300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Introduction Quick Guide In this page, connection of the projector and the video equipment is explained as an example for the procedure from setup to projection. Refer to each page for details. Required equipments Projector Remote control • Insert the batteries. (Page 11) Power cord Video equipment Video cable 1. Place the projector facing a wall or a screen. 2. Connect to video equipment. (Page 16) 6. Turn the projector on using control. (Page 30) on the remote ON button INPUT 4 button The power indicator illuminates green. 7. Press on the remote control to select the INPUT 4 mode. (Page 31) "On-screen Display Video cable To INPUT 4 terminal 8. Turn on the video equipment. To video output terminal 3. Connect the output terminal of the video equipment to the input terminal of the audio equipment using an audio cable. 4. Plug the power cord into the AC socket of the projector and into the wall outlet. (Page 14) 5. Remove the lens cap from the lens. Lens cap ON 9. Play the video. 10.Adjust the image size, image position and the focus. (Page 25) Adjust the zooming by moving the zoom knob. Adjust the height of the image by rotating the lens shift dial. Power cord Adjust the focus by rotating the focus ring. Note • This projector can also be connected to a computer as well as to video equipment. (Page 21) -7 %5@&@Q@Q Page 7 03.10.29, 2:38 PM "EPCF1BHF.BLFS+11$