Sharp DV-SL80U DV-SL80U Operation Manual - Page 12

PLAYING A DISC Title / Chapter Search 1 Press SEARCH MODE repeatedly until the Chapter or Title search screen appears. 2 Enter the desired chapter/title num- ber using the numerical buttons. DVD DVD-RW VR mode /2 NOTE: • Depending on the disc being played, this function can also be performed by directly entering the desired chapter number using numerical buttons. Refer to the manual accompanying the disc. Time Search DVD DVD-RW CD VR mode 1 Press SEARCH MODE repeatedly until the Time Search screen appears. 2 Within 30 seconds, enter a desired disc time using the numerical buttons. • Playback will start at the specified time. • When there is no need to enter a number, "0" appears automatically. For example, "0:0_:_ _" appears in the Time Search display if the total time of the disc is less than 10 minutes. NOTE: • Press CLEAR to erase the incorrect input. Repeat The repeat function is available only during playback. DVD To activate the repeat function, press REPEAT during playback. • The repeat mode changes as described below every time you press the button. CHAPTER TITLE (current chapter repeat) (current title repeat) OFF (repeat off) DVD-RW VR mode CHAPTER TITLE ALL OFF (current chapter repeat) (current title repeat) (entire disc repeat) (repeat off) NOTES: • Repeat Title/Chapter is not available with some scenes. • The REPEAT setting will be cleared when moving to other title or chapter. CD To activate the repeat function, press REPEAT during playback. • The repeat mode changes as described below every time you press the button. TRACK ALL (current track repeat) (entire disc repeat) OFF (repeat off) NOTES: • The REPEAT setting will be cleared when moving to other track. • Repeat playback does not function during A-B REPEAT playback. MP3 TRACK GROUP ALL OFF (current track repeat) (current group repeat) (entire disc repeat) (repeat off) A-B REPEAT DVD DVD-RW CD VR mode 1 Press A-B REPEAT at your chosen starting point. • A- appears briefly on the TV screen. 2 Press A-B REPEAT again at your chosen end point. • A-B appears briefly on the TV screen, and the repeat sequence begins. 3 To exit the sequence, press A-B REPEAT. NOTES: • The A-B REPEAT section can only be set within the current title (for DVDs), or current track (for audio CDs). • A-B REPEAT is not available with some scenes in DVD. • To cancel the A point which was set, press CLEAR. • A-B REPEAT playback does not function during title, chapter, track or all repeat playback. Program (CD) CD You may determine the order in which tracks will play. 1 Press MODE (playback must first be stopped). • The PROGRAM screen 0:03:30 appears. 2 Press ▲ or ▼ to select a track, then press ENTER. • Press CLEAR to erase the most recently entered program. 3 Press PLAY to play the programmed tracks. NOTES: • Press STOP once and then PLAY again, playback will restart from the point where STOP was pressed. • Press STOP twice and then PLAY. Playback starts from the first track in the original order. However, the program can be called back when you follow the above steps. Your programs will be stored unless either the disc tray is opened or power is turned off. • Up to 99 tracks can be entered. • To erase all tracks in the program at once, select ALL CLEAR at the bottom of the list at Step2. • To repeat the current track in the program, press REPEAT repeatedly until TRACK appears during playback. If you like to repeat the entire program press REPEAT repeatedly until ALL appears during playback. Random Playback (CD) CD This shuffles the playing order of tracks instead of playback in the sequence. 1 In stop mode, press MODE repeatedly until the RANDOM screen appears. 2 Press PLAY to start random playback. NOTE: • To repeat the current track in the random selection, press REPEAT repeatedly until TRACK appears during playback. To repeat the entire random selection press REPEAT repeatedly until ALL appears during playback. - 12 - EN