Sharp DV-SL80U DV-SL80U Operation Manual - Page 16

DVD SETUP Display Setting You can change certain aspects of the DVD display screens, on-screen messages and the display panel on the front of the DVD player. 1 Press SETUP in STOP mode. 2 Press s or B to select (CUSTOM), then press ENTER. • On screen menu will appear. 3 Press s or B to select confirm. (DISPLAY), then ENTER to 4 Press K or L to select the below items, then press ENTER. TV ASPECT : • Press K or L for an item selection, then press ENTER. • Select 4:3 LETTER BOX for a black bars appears on top and bottom of the screen. DISPLAY TV ASPECT STILL MODE ANGLE ICON AUTO POWER OFF PROGRESSIVE PANEL DISPLAY 4:3 LETTER BOX AUTO ON ON OFF BRIGHT • Select 4:3 PAN & SCAN for a full height picture with both sides trimmed. PAN & SCAN is only available on DVDs recorded with this option, if not LETTER BOX mode will be used. • Select 16:9 WIDE if a wide-screen TV is connected to the DVD player. • The default setting is 4:3 LETTER BOX. • You can also adjust the setting from (QUICK) setup menu. STILL MODE : • Press K or L for an item selection (AUTO, FIELD, or FRAME), then press ENTER. • This adjusts the resolution of still pictures. • AUTO is normally selected (default). • If you select FIELD, still pictures will be stabilized although they will be coarse due to little amount of data. • If you select FRAME, still pictures will be highly defined although they will be blurred due to output of two fields at the same time. ANGLE ICON : • Press ENTER repeatedly to turn Angle icon ON or OFF. • The default setting is ON. AUTO POWER OFF : • Press ENTER repeatedly to turn Auto Power off ON or OFF. • The default setting is ON and it will turn the DVD player to off automatically after 35 minutes of no use. PROGRESSIVE : • Press K or L to set PROGRESSIVE to ON or OFF, then press ENTER. • The setting will be effective when you exit the setup screen by pressing SETUP. • When PROGRESSIVE is ON, "P.SCAN" appears on the DVD player's display. • The default setting is OFF. • Refer to page 6 for more details. PANEL DISPLAY : • Press K or L for an item selection BRIGHT, DIMMER or AUTO, then press ENTER. • This adjusts the brightness of the display panel with the factory default BRIGHT. • When AUTO is selected, the display dims only during playback. 5 Press SETUP to exit. NOTE: • Be sure to press SETUP, or the setting will not work. Language Setting Language options are not available with some discs. 1 Press SETUP in STOP mode. 2 Press s or B to select (CUSTOM), then press ENTER. • On screen menu will appear. 3 Press s or B to select (LANGUAGE), then press ENTER to LANGUAGE AUDIO SUBTITLE DISC MENU PLAYER MENU ORIGINAL OFF ENGLISH ENGLISH confirm. 4 Press K or L to select the below items, then press ENTER. AUDIO : • Sets the audio language. SUBTITLE : • Sets the subtitle language. DISC MENU : • Sets the language for DVD Menu. PLAYER MENU : • Sets the language for the On-Screen display. • You can also adjust the setting from (QUICK) setup menu. 5 Press K or L to select a setting, then press ENTER. • If OTHER is selected in the AUDIO, SUBTITLE or DISC MENU screen, press four-digit number to enter the code for the desired language. (Refer to the language code below.) • Only the languages supported by the disc can be selected. 6 Press SETUP to exit. NOTE: • Language Setting for Audio and Subtitle is not available with some discs. Then use AUDIO and SUBTITLE. Details are on pages 13 and 14. Returning all selections of SETUP (except for PARENTAL) to their default settings This allows you to return all selections of SETUP (except for PARENTAL) to their default settings. 1 Press SETUP in STOP mode. 2 Press s or B to select (INI- TIALIZE), then press ENTER. 3 Select YES. 4 Press SETUP to exit. NOTE: • When you cancel to initialize at step 3 , select NO. QUICK SETUP PLAYER MENU TV ASPECT DOLBY DIGITAL ENGLISH 4:3 LETTER BOX BITSTREAM INITIALIZE Initialize? NO YES - 16 - EN