Sharp DV-SR45U Operation Manual - Page 38

Recording Settings for an external source (cont'd) Recording from an external source Video DVD-RW VR DVD-RW DVD-R Before recording from an external source, see the instructions for the connection on page 37. 1. Turn the TV and the DVD recorder on, and be sure to select the input of the TV to which the DVD recorder is connected. POWER OPEN/CLOSE TIMER 2. Press OPEN/CLOSE A button to open the disc tray, then place the disc to record properly. 1 DISPLAY PROG. A 2 .@/: ABC DEF 1 2 3 CH GHI JKL MNO 3 4 5 6 This operation may take a while to be recognized. 5 REC MONITOR PQRS 7 REC MODE CLEAR TUV 8 SPACE 0 WXYZ 9 CM SKIP 4 3. Press OPEN/CLOSE A button to close the disc tray. 6 REC PAUSE F SKIP H G 4. Select the input of the DVD recorder which the external equipment is connected. (L2 or L1) • To use the input jacks on the back of this unit, select "L1" position by pressing [0], [0], [1] on the remote control or the CH L / K buttons. • To use the input jacks on the front of this unit, select "L2" position by pressing [0], [0], [2] on the remote control or the CH L / K buttons. B PLAY REV FWD h g STOP C SETUP TOP MENU MENU/LIST K REPEAT ENTER { B ZOOM RETURN L 8 5. Select a recording speed using REC MODE button. Refer to "Recording speed" on page 26. XP SP LP SEP SLP EP 6. Press REC button on the DVD recorder to start recording. 7. Press Play button on the external source to record from. 8. Press STOP Cbutton on the DVD recorder to stop recording. This operation may take a while to be completed. 38