Sharp FU-40SES Operation Manual - Page 11
Using The Remote Control
![]() |
View all Sharp FU-40SES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH 2 Install the filter Tabs HEPA filter 1 Remove the HEPA filter from the polyvinyl bag and install it in the main unit with the display facing up. Insert so that the tabs on the HEPA filter are facing toward you. Proper operation cannot be achieved when installing the filter backwards. 2 Remove the stamina-power carbon from the polyvinyl bag and install it in the main unit. Make sure the tabs on the HEPA filter remain visible. Stamina-power carbon 3 Install the pre-filter Insert the 4 tabs on the pre-filter in the holes of the main unit. 4 Fill in the usage start date on the replacement label affixed on the back of the front panel and then mount the front panel. Use the date as a guide for the filter replacement period. Back of front panel Replacement label USING THE REMOTE CONTROL • Operate the remote control facing the main unit (receiver). • The signal range is about 7m (front). • Make sure there are no objects blocking the path of the signal. • A sound will be heard from the main unit when a signal is received. Receiver Transmitter NOTE • Avoid strong impact on the remote control. In addition, do not wet the remote control or place it under direct sunlight or near a stove, etc. Malfunction may occur as a result. E-9
![](/manual_guide/products/sharp-fu40ses-operation-manual-cab19f3/11.png)