Sharp FU-40SES Operation Manual - Page 8
Installation
![]() |
View all Sharp FU-40SES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
INSTALLATION WHEN USING THE UNIT ON A WHEN USING THE UNIT WITH TABLETOP A MOUNTED WALL MOUNTING THE STAND 1 Remove the front panel. • At this time, also remove the pre-filter, stamina-power carbon and the HEPA filter. Front panel 1 2 1 2 Place the unit with its front side facing down on a flat and stable surface. • Place a soft cloth, etc., to prevent damaging the unit. CAUTION • When mounting the air purifier to the wall, the mounted wall will become dirty as time passes. To prevent this, place a vinyl sheet, etc., around the unit. • A wall side to install is to choose the place to have the strength done firmly. • In the case of a wall or concrete wall with little strength, request installation to a specialist such as an electric appliance shop, etc. • Do not install in a location with heavy lampblack, such as in a kitchen, etc. The unit surface may crack as a result. 1 Determine the mounting location Leave space around the bracket by referring to the illustration below. The unit cannot be mounted if there is insufficient spacing around the bracket. 75cm or more 69cm or more from the ceiling 3 Insert the tabs on the stand into the holes on the main unit and fix the stand using the included thumbscrews (2 units). Tabs Holes Thumbscrews E-6 Size of main unit 75cm or more 75cm or more Mounting bracket 1 60cm or more from 60cm or more sidewall from sidewall CAUTION Mount on a flat surface • Do not mount the unit to a location that is not flat such as a wall with a door header, etc. Do not mount the unit to a thin wall with little strength such as a plasterboard, etc. The unit may fall and can be very dangerous.
![](/manual_guide/products/sharp-fu40ses-operation-manual-cab19f3/8.png)