Sharp FU-40SES Operation Manual - Page 14

CARE AND MAINTENANCE (To maintain the best performance of this product, please clean the unit periodically.) When cleaning, be sure to remove the power plug from the wall outlet. In addition, never handle the power plug with wet hands. Electrical shock and/or bodily injury may occur as a result. MAIN UNIT For soiling on the main unit and the installed surface, clean as early as possible. Stubborn dirt may be hard to remove. Dry wipe with a soft cloth For stubborn dirt, wipe with a soft cloth dampened with water or warm water of 40°C or less. Do not use volatile fluids Benzene, paint thinner, polishing powder, etc., may damage the unit surface. Do not use detergents Detergent ingredients may damage the unit surface. Do not get wet Never apply water on the unit. ODOR SENSOR DUST SENSOR The sensitivity of the sensors will be come unstable if the odor or dust sensor is dirty or blocked. Remove dust on the surfaces of the sensor openings using a vacuum cleaner. FILTERS Clean using the nozzle of a vacuum cleaner without removing the pre-filter. NOTE Never wash or clean the HEPA filter or stamina-power carbon by directly contacting the nozzle of a vacuum cleaner. This will greatly decrease the performance of the filters. Odor sensor Dust sensor E-12