Sharp HT-SB300 HT-SB300 Operation Manual - Page 15

■ Connecting to a TV If the TV/monitor has an audio output, connect it to the LINE IN 1 jacks on the rear of the speaker. To select LINE IN 1 function: ● On speaker: Press FUNCTION button repeatedly until "L1" is displayed. ● On remote control: Press LINE button repeatedly until "L1" is displayed. TV ■ Connecting to a TV (with Headphone jack) If the TV/monitor has headphone jack, connect it to the LINE IN 2 jack on the rear of the speaker. HT-SB300 To select LINE IN 2 function: ● On speaker: Press FUNCTION button repeatedly until "L2" is displayed. ● On remote control: Press LINE button repeatedly until "L2" is displayed. TV HEADPHONE Preparation for Use To audio output jacks RCA cable (supplied) To LINE IN 1 jacks To HEADPHONE jack Audio cable (not supplied) To AUDIO LINE IN 2 jack Speaker LINE IN 2 RIGHT LEFT LINE IN 1 Speaker LINE IN 2 RIGHT LEFT LINE IN 1 Notes: ● If the TV volume is continuously in low level, the speaker will automatically power off. Increase the TV output volume to enjoy the sound from the speaker. ● If the speaker volume is continuously in very high level, the speaker will mute and recover after 3 seconds. 15