Sharp HT-SB350 HT-SB350 Operation Manual - Page 10

Sound bar connections to TVs (continued) ■ Connecting to a TV Digital connection: Connect to the TV using an optical digital audio cable or a coaxial digital audio cable. To optical TV digital audio output socket Coaxial digital audio cable (commercially available) To COAXIAL input socket Audio signal Audio signal Optical digital audio cable (commercially available) To OPTICAL input socket Sound bar To select DIGITAL 1 (coaxial input) or DIGITAL 2 (optical input) function: ● On the unit: Press FUNCTION button repeat- edly until "d1" or "d2" is displayed. ● On remote control: Press DIGITAL 1 or DIGITAL 2 button and "d1" or "d2" is displayed. Analog connection: If the TV/monitor has an audio output, connect it to the LINE IN 1 or LINE IN 2 jacks on the rear of the unit. To select LINE IN 1 or LINE IN 2 function: ● On the unit: Press FUNCTION button repeat- edly until "L1" or "L2" is displayed. ● On remote control: Press LINE button repeat- edly until "L1" or "L2" is displayed. Notes: ● If the TV volume is continuously in low level, the unit will automatically power off. Increase the TV output volume to enjoy the sound from the speaker. ● If the speaker volume is continuously in very high level, the unit will mute and recover after 3 seconds. TV To audio output jacks To headphone jack Audio cable (not supplied) RCA cable (supplied) Sound bar To LINE IN 1 jacks To AUDIO LINE IN 2 jack ■ Connecting a digital tuner, etc. Connect to the digital tuner, etc. using an optical digital audio cable or a coaxial digital audio cable. To select DIGITAL 1 (coaxial input) or DIGITAL 2 (optical input) function: ● On the unit: Press FUNCTION button repeat- edly until "d1" or "d2" is displayed. ● On remote control: Press DIGITAL 1 or DIGITAL 2 button and "d1" or "d2" is displayed. To coaxial digital audio output socket To optical digital audio output socket To the TV (video) Coaxial digital audio cable (commercially available) To COAXIAL input socket Audio signal Audio signal Optical digital audio cable (commercially available) To OPTICAL input socket Sound bar Note: When connecting with an optical digital cable, set the digital output of the digital tuner to PCM. Refer to the operation manual of the digital tuner. E-