Sharp HT-SB350 HT-SB350 Operation Manual - Page 13

General control (continued) The Dolby Virtual Speaker creates multichannellike sound effects. Compared with the cinema mode, the bass sound level is slightly reduced. The Dolby Pro Logic II indicator also lights up if 2ch sound signals are detected. ● DVS can only be turned on using remote control. ● If you turn ON DVS, WOW HD will automatically turn OFF. ● The DVS can be turned OFF by pressing any of the preset sound mode buttons. This product incorporates decoders supporting the Dolby Digital system and DTS system. DTS (Digital Theater Systems) One of the digital audio systems for theatrical use. As the sound quality is emphasized, you can enjoy the realistic sound effect in the home theater system. Lights up when detecting DTS signal. Dolby Digital One of the digital audio systems for theatrical use. You can also enjoy the stereophonic effect in the home theater system. Lights up when detecting Dolby Digital signal. ■ Subwoofer level control The speaker level can be adjusted. To increase the level, press the SUBWOOFER LEVEL button. To decrease the level, press -5 -4 ... 4 5 the SUBWOOFER LEVEL button. Note: When sound from the speaker is distorted, decrease the subwoofer level. ■ Bass control  Press the BASS/TREBLE button to select "BASS".  Within 5 seconds, press the VOLUME (+ or -) button to adjust the bass. -5 +5 ■ Treble control  Press the BASS/TREBLE button to select "TREBLE".  Within 5 seconds, press the VOLUME (+ or -) button to adjust the treble. Dolby Pro Logic II System expanding 2ch stereo sound to more spacious sound. When setting Dolby Virtual speaker to "ON", Dolby Pro Logic II is activated to enjoy the stereo sound effect. Lights up when Dolby Pro Logic II is activated. -5 +5 E-12