Sharp LC-20D30U LC-20D30U Operation Manual - Page 40

Connecting a PC (Continued) INPUT SIGNAL (for PC mode) Select the computer input signal before displaying the PC image on the LCD TV screen. A • Make sure to select the input signal to "1280 × 768", "1024 × 768", "800 × 600" or "640 × 480", before connecting a PC. FINE SYNC. Adjustments (for PC mode) You can adjust the PC image using the FINE SYNC. menu. 1 Press MENU to display the Menu screen. 2 Press \/| to select "SETUP". 3 Press '/" to select "PC SETUP", and press ENTER. SETUP�� �OPTION CH�SETUP MTS CLOCK INPUT3�SELECT VﾐCHIP�BLOCK CLOSED�CAPTION COLOR�SYSTEM HDMI�SETUP PC�SETUP LANGUAGE 4 Press '/" to select "INPUT SIGNAL", and press ENTER. 5 Press '/" to select the desired input signal and press ENTER. � � 1 2 8 �0 x 7 6 8 ( 6 �0 H z ) � � 1 �0 2 4 x 7 6 8 ( 6 �0 H z 8 �0 �0 x 6 �0 �0 ( 6 �0 H z 6 4 �0 x 4 8 �0 ( 6 �0 H z ) 1 Repeat steps 1 to 3 of INPUT SIGNAL (for PC mode) to display the PC SETUP screen. 2 Press '/" to select "FINE SYNC.", and press ENTER. 3 Press '/" to select the specific adjustment item. H . P O S 0 V . P O S 0 C L O C K 0 P H A S E 0 RESET���� 4 Press \/| to adjust the item to the desired position. 5 Press MENU to exit. Selected item H.POS. V.POS. CLOCK PHASE Description Centers the image by moving it to the left or right. Centers the image by moving it up or down. Adjusts the clock frequency. Adjusts the clock phase. A • When resetting all adjustment items to factory preset values, perform the following procedure. 1 Press '/" to select "RESET", and press ENTER. 2 Press '/" to select "YES" and press ENTER. 6 Press MENU to exit. 38