Sharp LC-20S5U LC-20S5U Operation Manual - Page 12

Part Names of the Main Unit Controls Upper control panel CH ( )/( ) INPUT VOL ( )/( ) MENU POWER How to adjust the angle Speaker Tilt the display by grabbing onto the carrying handle while securely holding down the stand with your other hand. To change the vertical angle of the LCD TV set, tilt the screen up to 2.5 degrees forward or 10 degrees backward. Please adjust the angle so that the LCD TV set can be watched most comfortably. Headphone jack ( ) Plug the headphone mini-plug into the headphone jack located on the front of the main unit. OPC (Optical Picture Control) sensor Remote sensor OPC (Optical Picture Control) indicator The OPC indicator lights up green when "OPC" is set to "ON". (See page 20.) POWER/WAKE UP TIMER indicator POWER/WAKE UP TIMER indicator lights up green when the power is on, and red when in the standby mode (the indicator will not light when the main power is off), and orange when the wake up timer is set (the indicator will light when in the standby mode). A • INPUT, CH ( )/( ), VOL (-)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control. Fundamentally, this operation manual provides a description based on operation using the remote control. Listening with Headphones ■ Plug the headphone mini-plug into the headphone jack located on the front of the main unit. Headphones ▼ On-screen display VOLUME 10 + Adjust the sound volume using VOL ( )/(-) on the remote control. A • Headphones are not included in the supplied accessories. • No sound is heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack. • Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels. 10