Sharp LC-20S5U LC-20S5U Operation Manual - Page 25

Basic Adjustment Settings (Continued) FILM MODE Automatically detects a film-based source (originally encoded at 24 frames/second), analyses it, and then recreates each still film frame for cinematic picture quality. AUDIO Adjustments You can adjust the sound quality to your preference with the following settings. 1 Repeat steps 1 to 3 of COLOR TEMPERATURE on page 22. 2 Press '/" to select "FILM MODE", and press ENTER. ��ON ��OFF 3 Press '/" to select "ON", and press ENTER. 4 Press MENU to exit. A • Set "FILM MODE" to "ON" manually to detect a film-based source (originally encoded at 24 frames/second). • "FILM MODE" cannot be set when 480P, 576P, 720P or 1080I signal is received from the COMPONENT terminals. 1 Press MENU to display the Menu screen. 2 Press \/| to select "AUDIO". 3 Press '/" to select a specific adjustment item. AUDIO� � SETUP� ��OPTION T R E B L E 0 B A S S 0 B A L A N C E 0] L R RESET 4 Press \/| to adjust the item to the desired position. 5 Press MENU to exit. Selected item TREBLE BASS BALANCE \ button For weaker treble For weaker bass Decrease audio from the right speaker | button For stronger treble For stronger bass Decrease audio from the left speaker A • The items on the AUDIO menu cannot be set when headphones are not used and "INPUT3 SELECT" is set to "OUT VAO". • When resetting all adjustment items to factory preset values, perform the following procedure. 1 Press '/" to select "RESET" in the AUDIO screen, and press ENTER. 2 Press '/" to select "YES", and press ENTER. 23