Sharp LC-50LB601U User Guide LC 43LB601C - Page 21
Connecting an antenna or cable TV no box
View all Sharp LC-50LB601U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
LC-43LB601U / LC-50LB601U / LC-43LB601C / LC-50LB601C 43" / 50" Full HD LED 1080p Sharp Roku TV Connecting an antenna or cable TV (no box) On your TV Antenna or cable TV (no box) Coaxial cable connector Coaxial cable ANT/CABLE jack VIDEO L AUDIO R AV IN HDMI1(ARC) HDMI2 AUDIO OUT ANT/CABLE Back TV 1 Make sure that your TV's power cord is unplugged and all connected devices are turned off. 2 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the antenna or cable TV wall jack. 3 Plug your TV's power cord into a power outlet, then turn on your TV. 4 On the Home screen, press or to highlight the Antenna TV tile, then press OK. If you have not set up the TV tuner, follow the on-screeen instructions. Notes • Use a coaxial cable to eliminate interference and noise from radio waves. • Do not bundle the coaxial cable with the power cord or other cables. • If the antenna is not installed correctly, contact qualified service personnel to correct the problem. • If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a highly directional outdoor or set-top antenna with a built-in amplifier. • If the picture quality is good on some channels and poor on others, the problem may be caused by a poor or weak signal from the broadcaster or cable TV provider. • If you connect to cable TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable TV provider about upgrading to a set-top box. • Many high-definition (HD) channels upscale standard-definition (SD) content. The picture displayed on your TV is still displayed as SD, thus the picture quality will not be as clear or crisp as it would be if the content was originally recorded in HD. 21