Sharp LC-50LB601U User Guide LC 43LB601C - Page 30

Digital audio using the HDMI1(ARC) jack LC-43LB601U / LC-50LB601U / LC-43LB601C / LC-50LB601C 43" / 50" Full HD LED 1080p Sharp Roku TV Your TV can send sound to an ARC device, like an AV receiver, to create a home theater that uses two or more speakers. When you connect external speakers or a sound bar, sound plays through your TV speakers and the external speakers or sound bar. ARC audio device On your TV HDMI® cable connector Sound bar HDMI® cable HDMI1(ARC) jack VIDEO L AUDIO R AV IN HDMI1(ARC) HDMI2 AUDIO OUT ANT/CABLE Back of TV 1 Make sure that your TV's power cord is unplugged and the digital speaker system or sound bar is turned off. 2 Connect an HDMI® cable (not provided) to the HDMI1(ARC) jack on the back of your TV and to the HDMI IN jack on the digital speaker system or sound bar. 3 Plug your TV's power cord into a power outlet, then turn on your TV. 4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the documentation that came with the digital speaker system or sound bar. 5 To turn off your TV speakers, on the Home menu, press or to highlight Settings, then press OK. Highlight Audio, then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV speakers enabled check box. 6 To configure the HDMI1(ARC) jack to output sound to an ARC device, on the Home menu, press or to highlight Settings, then press OK. Highlight System, then press OK. Highlight Control other devices (CEC), then press OK. Highlight HDMI ARC, then press OK to check the box. 30