Sharp LC32DV24U Service Manual - Page 17
: LCD BLOCK Refer to Fig. 1-5
UPC - 074000371293
View all Sharp LC32DV24U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
DISASSEMBLY INSTRUCTIONS 1-4: REMOCON PCB (Refer to Fig. 1-4) 1. Disconnect the following connector: (CP4201). 2. Remove the 2 screws (1). 3. Remove the Remocon PCB in the direction of arrow. (1) (1) Remocon PCB (2) (1) (3) (2) (4) (A) Plate Jack (5) (5) (5) (5) (5) (5) Shield Digital Digital PCB (B) Fig. 1-4 1-5: LCD BLOCK (Refer to Fig. 1-5) 1. Remove the Holder Panel-1 and Holder Panel-2. 2. Remove the 4 screws (1). 3. Remove the LCD Block in the direction of arrow. 4. Remove the 2 screws (2). 5. Remove the Angle Main. Angle Main (2) (2) Angle Main (1) (1) (1) LCD Block (1) Holder Panel-2 Holder Panel-1 Fig. 1-6 1-7: POWER PCB (Refer to Fig. 1-7) 1. Disconnect the following connectors: (CP302 and CP406). 2. Remove the Holder Wire and Spring Earth. 3. Remove the 6 screws (1). 4. Remove the Power PCB in the direction of arrow (A). 5. Remove the screw (2). 6. Remove the Angle PCB-1 in the direction of arrow (B). (1) Power PCB Holder Wire (1) (1) (1) (1) (A) (1) (2) Spring Earth Holder Wire Angle PCB-1 (B) Holder Panel-2 Fig. 1-5 1-6: DIGITAL PCB (Refer to Fig. 1-6) 1. Disconnect the following connectors: (CP2804, CP3001 and CP4302). 2. Remove the screw (1). 3. Remove the 5 screws (2). 4. Remove the 2 screws (3). 5. Remove the screw (4). 6. Remove the Plate Jack in the direction of arrow (A). 7. Remove the 6 screws (5). 8. Remove the Digital PCB and Shield Digital in the direction of arrow (B). Fig. 1-7 B1-2