Sharp LC32DV24U Service Manual - Page 23
Service Mode List - replacement screen
UPC - 074000371293
View all Sharp LC32DV24U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
SERVICE MODE LIST This unit is provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote control for more than a the standard time in the appropriate condition. (See below chart.) Set Condition TV mode Set Key VOL. DOWN (Minimum) Remocon Key 0 TV mode VOL. DOWN (Minimum) 1 Standard Time Operations 2 sec. Releasing of V-CHIP PASSWORD. 2 sec. Initialization of factory TV data. NOTE: If you set factory initialization, the memories are reset such as the channel setting, and the POWER ON total hours. DVD mode VOL. DOWN (No disc) (Minimum) 4 2 sec. Initialization of factory DVD data. DVD mode VOL. DOWN (No disc) (Minimum) 5 ALL mode VOL. DOWN (Minimum) 6 ALL mode VOL. DOWN (Minimum) 8 ALL mode VOL. DOWN (Minimum) 9 DVD mode STOP 1 (No disc) 2 sec. DVD Write mode. Refer to the "RE-WRITE FOR DVD FIRMWARE". 2 sec. 2 sec. 2 sec. 2 sec. POWER ON total hours are displayed on the screen. Can be checked of the INITIAL DATA of MEMORY IC. Refer to the "WHEN REPLACING EEPROM (MEMORY) IC". Check of the SUM DATA and MICON VERSION on the screen. Refer to the "WHEN REPLACING EEPROM (MEMORY) IC". Display of the Adjustment MENU on the screen. Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display Adjustment). DCheck of the firmwaVre version. D Refer to the "RE-WRITE FOR DVD FIRMWARE". DVD mode (No disc) STOP 7 2 sec. Releasing of PARENTAL LOCK. Refer to the "PARENTAL CONTROL - RATING LEVEL". C-1