Sharp LC32DV24U Service Manual - Page 6
Cwhen Replacing Dvd Deck - service manual
UPC - 074000371293
View all Sharp LC32DV24U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
WHEN REPLACING DVD DECK [ When removing the DVD Deck ] Before removing Pick Up PCB and DVD MT PCB connector, the short circuit the position shown in Fig. 1 using a soldering iron. If you remove the DVD Deck with no soldering, the Laser may be damaged. [ When installing the DVD Deck ] Remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD MT PCB connector. NOTE • Before your operation, please read "PREPARATION OF SERVICING". • Use the Lead Free solder. • Manual soldering conditions • Soldering temperature: 320 ± 20oC • Soldering time: Within 3 seconds • Soldering combination: Sn-3.0Ag-0.5Cu • When Soldering/Removing of solder, use the draw in equipment over the Pick Up Unit to keep the Flux smoke away from it. Pick Up PCB Short circuit using a soldering iron. Fig. 1 A1-5