Sharp LC32DV24U Service Manual - Page 24

Re-write For Dvd Firmware, Servicing Fixtures And Tools

Get Sharp LC32DV24U - 31.5inch LCD TV PDF manuals and user guides
UPC - 074000371293
View all Sharp LC32DV24U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

JG176 Up-Date Disc SERVICING FIXTURES AND TOOLS Ref. No. JG176 Part No. APJG176140 Parts Name Up-Date Disc Remarks Up-Date of the Firmware RE-WRITE FOR DVD FIRMWARE 1. Turn on the power, and set the DVD mode. 2. Confirm that the "No Disc" will be appeared on the screen. 3. Press both VOL. DOWN button on the set and Channel button (5) on the remote control for more than 2 seconds. 4. Press VOL. UP/DOWN button on the unit to check if all the keys on the unit do not function. NOTE: To check if DVD Write mode is set. When inserting Up-Date Disc at Non DVD Write mode, the read error will happen. 5. Insert the Up-Date Disc. (Refer to SERVICING FIXTURE AND TOOLS) 6. Automatic read will start and "Firmware upgrade Please Wait" will be displayed on the screen. At this time, the horizontal noise lines may appear. But no problem. NOTE: Do not turn off the unit on the way or operate the keys on the unit and remocon. Up-Date error will happen and can not be done with the Up-Date of Up-Date Disc. 7. After the Up-Date, Logo screen will appear. 8. Unplug the AC cord, then plug it in. After the write, set to the initializing of shipping. 9. Turn on the power, and set the DVD mode. 10. Press both VOL. DOWN button on the set and Channel button (4) on the remote control for more than 2 seconds. The "INITIALIZE 5 ---> COMPLETE" will appear on the screen. 11. Then unplug the AC cord, and plug it in. CHECK FOR THE FIRMWARE VERSION 12. Turn on the power, and set the DVD mode. 13. Press both Channel button (1) on the remote control and the STOP button on the set for more than 2 seconds. Firmware version will be displayed on the top left of the screen. F/W Ver. ADLLA8415A Initialize: Complete Laser drive time DVD LD: 0Hour CD LD : 0Hour A D L L A8 4 1 5 A Fixed Released times on the same date Release date (Example: 2008.04.15) When the changed version displays, the Re-write will be completed. 14. Turn off the power A = October B = November C = December C-2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
C-2
Turn on the power, and set the DVD mode.
Confirm that the "No Disc" will be appeared on the screen.
Press both VOL. DOWN button on the set and Channel button
(5)
on the remote control for more than 2 seconds.
Press VOL. UP/DOWN button on the unit to check if all the keys on the unit do not function.
NOTE: To check if DVD Write mode is set.
When inserting Up-Date Disc at Non DVD Write mode, the read error will happen.
Insert the Up-Date Disc.
(Refer to SERVICING FIXTURE AND TOOLS)
Automatic read will start and "Firmware upgrade Please Wait" will be displayed on the screen.
At this time, the horizontal noise lines may appear. But no problem.
NOTE: Do not turn off the unit on the way or operate the keys on the unit and remocon.
Up-Date error will happen and can not be done with the Up-Date of Up-Date Disc.
After the Up-Date, Logo screen will appear.
Unplug the AC cord, then plug it in.
After the write, set to the initializing of shipping.
Turn on the power, and set the DVD mode.
Press both VOL. DOWN button on the set and Channel button
(4)
on the remote control for more than 2 seconds.
The "INITIALIZE 5 ---> COMPLETE" will appear on the screen.
Then unplug the AC cord, and plug it in.
CHECK FOR THE FIRMWARE VERSION
Turn on the power, and set the DVD mode.
Press both Channel button
(1)
on the remote control and the STOP button on the set for more than 2 seconds.
Firmware version will be displayed on the top left of the screen.
Turn off the power
RE-WRITE FOR DVD FIRMWARE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
A
D
L
L
A
8
4
1
5
A
Fixed
Release date (Example: 2008.04.15)
Released times on the same date
A = October
B = November
C = December
When the changed version displays, the Re-write will be completed.
SERVICING FIXTURES AND TOOLS
JG176
Up-Date Disc
Ref. No.
JG176
Part No.
APJG176140
Parts Name
Up-Date Disc
Remarks
Up-Date of the Firmware
F/W Ver. ADLLA8415A
Initialize: Complete
Laser drive time
DVD LD: 0Hour
CD LD
: 0Hour