Sharp LLM15X1 Operation Manual - Page 31
Adjusting the display
View all Sharp LLM15X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
English Français Deutsch Italiano Adjusting the display You can adjust the color of the computer screen image using menus for the PC mode. Adjustment Pattern If you are using Windows, you can use the Adjustment Pattern on the accompanying CDROM. This explanation is for Windows 95/98/2000/Me/ XP, and assumes that the CD-ROM drive is "D" drive. 1. Load the accessory CD-ROM into the CD-ROM drive of the computer. 2. Open [My Computer] and select CD-ROM. If using Windows 3.1, open [File Manager] and choose "D" drive. 3. Double click on [Adj_uty.exe] to run the Adjustment Program. The Adjustment Pattern will appear. Adjustment Pattern After completing the adjustments, press the computer's [Esc] key to exit the Adjustment Program. Note: - If your computer's display mode is set to 65K colors, you may see the different color levels in each color pattern or the gray scale may look colored. (This is due to the specification of the input signal and is not a malfunction.) How to adjust The following procedure describes the basic operation method. See pages E30 through E32 regarding individual options. 1. Select the PC mode using the INPUT button (monitor) or the PC button (remote control). 2. Display the MENU screen using the MENU button. MENU ADJUSTMENT GAIN CONTROL COLOR CONTROL MODE SELECT < PC 3. Select the menu you want to set using the MENU button (monitor) or the buttons (remote control), and press the ENTER/BRIGHT MODE button (monitor) or the ENTER button (remote control). 4. Select the option you want to set using the MENU button (monitor) or the buttons (remote control), and press the ENTER/BRIGHT MODE button (monitor) or the ENTER button (remote control). 5. Change the numbers/values using the VOL/BRIGHT buttons (monitor) or the buttons (remote control). You can continue to set other options. Do the following to return to the previous screen: (1) Select "RETURN" using the MENU button (monitor) or the buttons (remote control). (2) Press the ENTER/BRIGHT MODE button (monitor) or the ENTER button (remote control). 6. Exit the MENU screen using the INPUT button (monitor) or the MENU button (remote control). The procedure is complete. Notes: - If you do not press any buttons for about 30 seconds while in a menu screen, the settings you made up to that point will be applied and the screen will automatically disappear. - This manual describes display adjustment based on the use of the Adjustment Pattern (for Windows). Español English E29