Sharp MS702 Operation Manual - Page 14
Recording Using A Microphone
UPC - 074000409415
View all Sharp MS702 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
RECORDING USING A MICROPHONE s Recording from the microphone (Mic synchro recording) The recording will begin automatically in response to a noise or a person speaking. When the sound stops, the recording will pause. This function is convenient when recording lectures, conferences, etc. Stereo microphone VOL / NAME (commercially available) To the MIC IN jack 1 Connect the stereo microphone to the MIC IN jack on the main unit. q When a microphone is connected to this unit, the unit will automatically switch to input from the microphone. 2 Insert a recordable Minidisc. 3 Press the REC button. q A monaural, long-play recording mode is available. (Page 17) q Timed identification marks can be 4 5 4 created while recording. (Page 15) Press the or button to adjust the recording level. 0dB -4dB q Adjust the recording level so that the maximum sound volume from the source makes the reading swing between -4 dB and 0 dB. q When the recording level display is changed from "MIC H" to "MIC L", the sound will be interrupted momentarily. This is normal. 5 Press the ENTER/F.PLAY/SYNCHRO button to select the synchro recording level. (This level can be changed, even while recording.) q Refer to the following table. Synchro recording Sound level at which level display to start recording Mic input MIC SYNC H -24dB MIC SYNC L -12dB q When the microphone input is set to MIC SYNC H, recording will start when a sound is detected at the lowest volume. If the unit starts recording too often due to low, unwanted noises, set the microphone input to MIC SYNC L. 13 MD-MS702